MSW Recycling Plant

Recently, a European client inquired about RDF pelleting equipment for their waste management company in Southeast Asia. The required output for pellets is 2-3 tons per hour, and the raw material is a mixture of sorted MSW combustibles, including plastics, cardboard, textiles, rubber, etc.After preliminary communication with the customer, we have gained an understanding of their general disposal process and specific requirements for the final product, confirmed our scope of supply. Then the customer made new requirements and wanted to add a mixer to mix wood dust and the shredded MSW combustibles together, to improve the quality of the molded products.After communicating with our technical team, we suggest to the customer that wood chips can be mixed with other raw materials and shredded together. Additionally, we will add a uniform feeder in front of the RDF pellet mill to facilitate mixing.Through half a day of communication and under the strong technical support of our technical team, we have successfully

There are several materials in municipal solid waste more suitable for preparing RDF (refuse derived fuel) to replace fuel. The following are some common examples:1. Plastic: Plastic is a common material in domestic waste, especially plastics such as polyethylene (PE), polypropylene (PP) and polystyrene (PS). These plastics have high thermal values and are suitable for preparation of RDF.2. Paper and cardboard: Paper and cardboard are renewable resources. They contain high cellulose, easy to burn, and relatively high thermal values.3. Textiles: Textiles, such as clothes, towels, and bedding, are usually composed of fibers and have a certain heat value.4. Wood and wood products: wood and products such as wood chips and wooden blocks are a natural fuel source with high heat value.5. Rubber and leather: Although the thermal value of rubber and leather is relatively low, they can be mixed with other high thermal components to improve the overall heat value of RDF.6. Organic waste: organic matter in kitchen waste

Municipal solid waste sorting plants are designed for the treatment of waste from the residential, commercial and industrial sectors. Contamination levels can be high and some components require special handling. The main sorting operations include screening, magnetic separation and manual sorting. The optical sorting not used because the raw material is usually "dirty". In the mixed waste stream, residues make up approximately 85% of the incoming mixed solid waste. A significant proportion of the residues consists of combustible and biodegradable materials. "Dirty" waste sorting plants are also used to obtain product for composting. However, this compost is of poor quality and this limits the potential market for the product.

Municipal Solid Waste(MSW) originates from domestic and general commercial activities and its main components include plastics, waste paper, metals, wood, food scraps, etc. In less developed areas, municipal solid waste is transported directly to landfill, which not only takes up a lot of land resources, but also contaminates the soil and groundwater, and the irritating gases can pollute even the surrounding kilometres.By shredding and screening municipal solid waste, valuable materials such as metals can be recovered and combustible materials can be made into waste-derived fuels for power or heat generation, while organic materials can be fermented to make compost or biogas.GEP ECOTECH shredding and screening technology effectively treats a wide range of municipal solid waste, both sorted and unsorted, using simple equipment for well sorted waste and a wide range of different equipment for unsorted waste.In addition, we can provide landfill stock disposal facilities to reduce pollution and extend the life